Grip-Tite Cross Plate Anchors are used in pre-excavated holes and utilize two formed, welded plates for higher holding capacity.
Grip-Tite Cross Plate Anchors are formed from structural steel and are ribbed for extra strength and reinforcement. Plate edges are flanged to resist creeping. Plates are welded at right angles for maximum holding ability and a nut retainer is provided to aid in installation.
Grip-Tite Cross Plate Anchors are used in combination with Power- Grip Forged Anchor Rods and come either coated in a high-grade asphalt or galvanized to ASTM A123 standards.
Catalog Number | Installation Hole Size (in.) | Area of Anchor (sq. in.) | Rod Diameter (in.) | Weight (lbs.) |
---|---|---|---|---|
XP16 | 16 | 150 | 5/8 – 3/4 | 10 |
XP20 | 20 | 250 | 5/8 – 3/4 | 16 |
XP20-1 | 20 | 250 | 1 | 16 |
XP24-3/4 | 24 | 400 | 5/8 – 3/4 | 32 |
XP24 | 24 | 400 | 1 | 32 |
XP24-1 | 24 | 400 | 1 1/4 | 31 |
Grip-Tite Part Number | Hubbell Part Number | MacLean Part Number | ECP Part Number | Description |
---|---|---|---|---|
XP16 | X16 | J3516 | PAS-1414 | 16″ Cross Plate Anchor with 3/4″ Nut Retainer |
XP20 | X20 | J3520 | PAM-1616 | 20″ Cross Plate Anchor with 3/4″ Nut Retainer |
XP20-1 | X201 | J3520-1 | – | 20″ Cross Plate Anchor with 1″ Nut Retainer |
XP24-3/4 | X2434 | J3524-3/4 | – | 24″ Cross Plate Anchor with 3/4″ Nut Retainer |
XP24 | X24 | J3524 | PAL2420 | 24″ Cross Plate Anchor with 1″ Nut Retainer |
XP24-1 | X241 | J3524-1 | – | 24″ Cross Plate Anchor with 1 1/4″ Nut Retainer |
505 E. Madison
Winterset, IA 50273
our other sites